Cable Tie Mounts & Wire Tie Mounts – Self-Adhesive, Saddle & Wall-Plug Bases
Wire tie mounts, zip tie mounts and cable tie bases that fix your bundles to panels, walls and machines — self-adhesive, screw-fixed saddle, hexagon and wall-plug styles in UL-approved PA66, shipped factory-direct from China.
SELF-ADHESIVE & SCREW-FIXUL94 V-2 PA66NATURAL & BLACKISO 9001:2015MOQ US$5,000
One supplier for every cable tie mount and zip tie base
Four mount families cover adhesive, screw-fixed and masonry installs. Pair them with our cable ties in one order.
Self-Adhesive Cable Tie Mounts
Adhesive-backed (sticky) zip tie mounts from 19×19 to 40×40 mm. No drilling; R and T styles also take a screw.
Cable Tie Saddle Mounts
Cable tie mounts with screws: saddle mounts in UL-approved PA66 for permanent runs on walls, chassis and machines.
Hexagon Mounts & Cable Tie Wall Mounts
HE-1 hexagon adhesive base for crossing bundles, and TTH/TTD holders for Ø9 mm wall-plug holes.
Which wire tie mount is right for your surface?
Choose mounting bases for cable ties by surface and how permanent the run is. Smooth panel: adhesive tie mount. Wall or chassis: cable tie saddle. Masonry: wall-plug holder.
| Mount type | How it fixes | Sizes | Material | Best For |
|---|---|---|---|---|
| Self-Adhesive Tie Mounts (HC) | Self-adhesive backing; R/T styles also have a screw hole | 19×19 to 40×40 mm | PA66 / PS, UL94 V-2 | Panels, cabinets and smooth surfaces with no drilling |
| Saddle Type Tie Mounts (KHC) | Screw-fixed saddle | 14.9–28.5 mm long | UL-approved PA66, 94V-2 | Permanent runs on walls, chassis and machines |
| Hexagon Tie Mount (HE-1) | High-strength adhesive backing | 34.38 mm | — | Crossing or parallel bundles from one base |
| Cable Tie Holders (TTH / TTD) | Push into a Ø9 mm wall-plug hole | 25–34.5 mm | UL-approved PA66, 94V-2 | Masonry and concrete walls |
| Adjustable Adhesive Clamps (TTC / TAP) | Adhesive base, adjustable strap | Bundles 7.9–26 mm | UL-approved PA66, 94V-2 | Re-openable routing for changing cable counts |
Confirm the right mount for your surface and tie size with our team before ordering.
Cable tie mount & zip tie base sizes and specifications
Every mount we list, with the dimensions you need to match a cable tie and a fixing.
Self-Adhesive Tie Mounts (HC series)
| Item No. | L × W (mm) | H (mm) | Mounting hole D (mm) | Cable tie hole T (mm) |
|---|---|---|---|---|
| HC-19S | 19×19 | 4.8 | — | 4.5 |
| HC-20S | 20×20 | 6.7 | — | 5.1 |
| HC-25S | 25×25 | 7.8 | — | 5.5 |
| HC-30S | 30×30 | 8.2 | — | 8.0 |
| HC-40S | 40×40 | 8.1 | — | 8.5 |
| HC-28S | 28×28 | 6.6 | 6.2 | 5.4 |
| HC-19R | 19×19 | 5.9 | 4.5 | 4.2 |
| HC-28R | 28×28 | 6.6 | 5.2 | 6.0 |
| HC-19T | 19×19 | 5.2 | 4.1 | 4.1 |
| HC-28T | 28×28 | 8.6 | 4.1 | 5.8 |
Saddle Type Tie Mounts (KHC series)
| Item No. | H (mm) | L (mm) | W (mm) | T (mm) | B (mm) |
|---|---|---|---|---|---|
| KHC-0 | 4.8 | 19.1 | 9.4 | 4.3 | 5.0 |
| KHC-1 | 7.2 | 14.9 | 9.5 | 5.1 | 4.5 |
| KHC-2 | 9.7 | 21.9 | 16.9 | 9.1 | 5.0 / 6.0 |
| KHC-3 | 11.7 | 28.5 | 15.0 | 9.4 | 5.0 |
Cable Tie Holders for wall plugs (TTH / TTD)
| Item No. | A (mm) | B (mm) | T (mm) | T1 (mm) | Screw |
|---|---|---|---|---|---|
| TTH-30 | 25 | 5.4 | 5 | — | 7 |
| TTH-37 | 31.5 | 5.8 | 9.5 | — | 8 |
| TTH-41 | 34.5 | 6 | 10 | — | 10 |
| TTD-30 | 25 | 5.4 | 5 | 17 | 7 |
| TTD-37 | 31.5 | 5.8 | 9.5 | 18 | 8 |
| TTD-41 | 34.5 | 6 | 10 | 19 | 10 |
Hexagon Tie Mount
| Item No. | H (mm) | W (mm) | Packing |
|---|---|---|---|
| HE-1 | 6.53 | 34.38 | 100 pcs per pack |
Choose a cable tie narrower than the mount’s tie hole (T). All dimensions in mm, from our product catalogue.
What’s the minimum order for cable tie mounts?
Our minimum order is US$5,000 per order, and you can mix mounts, cable ties and other products to reach it. Prices are quoted factory-direct.
- Mixed orders — mounts and matching ties in one shipment.
- Bulk colours — natural, black or custom for bulk orders.
- Free samples — test the adhesive on your surface first.
Cable tie mount material & technical data
Material data from our product catalogue. Lead time for your order is confirmed with the quotation.
How does ordering cable tie mounts work?
Seven steps, with sample approval before production so nothing reaches volume without your sign-off.
01
Send enquiry
Tell us the mount type, size, colour and quantity.
02
Confirm specs
We match mounts to your cable tie widths and surfaces.
03
Quotation
Factory-direct pricing and a lead time we can hold.
04
Sample approval
Free samples so you can test the mount on your surface.
05
Production
Moulded on our own lines to the approved sample.
06
QC inspection
Visual and dimension checks before packing.
07
Shipment
Packed to your spec with export documents.
The factory behind your cable tie mounts
Capacity you can verify on a factory visit or video audit.
Built for buyers who fix cables to every surface
Importers, distributors and panel builders order mounts and ties together, direct from our production line.
Panel builders Electrical contractors Solar installers Telecom & data Automotive & rail Distributors & wholesalers
How are cable tie mounts packed?
HE-1 hexagon mounts come 100 pieces per pack. Packing for the other series is confirmed with your quotation.
- Labelled polybags — counted to your order.
- Export cartons — packed for sea or air freight.
- Private label — discussed with your quotation.
Adjustable adhesive cable clamps
Need a mount you can open again? Our adjustable adhesive cable clamps hold a bundle with a re-openable strap on a self-adhesive base.
| Item No. | A (mm) | B (mm) | C (mm) | L (mm) | Max bundle (mm) |
|---|---|---|---|---|---|
| TTC-17 | 25.0 | 18.0 | 7.9 | 70.0 | 17.0 |
| TTC-22 | 30.5 | 21.0 | 12.0 | 90.0 | 22.0 |
| TTC-26 | 30.5 | 21.0 | 12.0 | 108.0 | 26.0 |
| Item No. | Bundle range A (mm) | B (mm) | C (mm) | D (mm) |
|---|---|---|---|---|
| TAP-0810 | 7.9–10.3 | 25.4 | 22.2 | 19.1 |
| TAP-1013 | 10.0–12.5 | 31.8 | 27.8 | 19.1 |
| TAP-1316 | 12.6–15.4 | 37.0 | 31.8 | 18.4 |
| TAP-1720 | 16.5–20.1 | 42.0 | 37.0 | 25.0 |
| TAP-2225 | 22.2–25.4 | 41.8 | 43.5 | 21.5 |
Need a tie with its own mounting hole instead of a separate base? See screw mount cable ties or push mount cable ties.
Where wire tie mounts and cable tie bases are used
Mounts keep bundles fixed and tidy wherever cables run along a surface.
Electrical Cabinets & Panels
Adhesive mounts route wiring inside cabinets and control panels without drilling.
Solar & Renewable Energy
Cable management on solar and renewable energy installations.
Telecom & Low-Voltage
Neat routing for telecom and low-voltage systems.
Industrial Automation
Fixing harnesses on industrial automation equipment and machines.
Automotive & Rail
Auxiliary wiring fixation in automotive and rail applications.
Walls & Masonry
A cable tie wall mount for concrete and brick: TTH/TTD holders push into wall plugs.
Adhesive-backed or screw-fixed cable tie mounts?
Pick the fixing that matches your surface and how long the installation must last.
| Question | Self-adhesive (HC, HE-1) | Screw / plug-fixed (KHC, TTH/TTD) |
|---|---|---|
| Drilling needed? | No | Yes |
| Surface | Clean, smooth panels and enclosures | Walls, chassis, masonry |
| Install speed | Peel and press | Fix screw or plug first |
| Extra hold | HC R/T styles also take a screw | Mechanical fix as standard |
Pair your mounts with nylon cable ties or, for heavier bundles, heavy duty cable ties.
Certified, compliant & ready for your audit file
Our factory certificates are below. Product documents for mounts are available on request.
How do we control quality on every batch?
Every order is checked before it is packed.
- Incoming material — checked before production.
- Moulding — on our own automated injection lines.
- Inspection — visual and critical-dimension checks.
- Documents — test reports on request.
Need a mount size or colour we do not list?
Send the surface, cable tie width, bundle size and annual quantity — our team will confirm what we can supply.
Photos from our cable tie factory in Bozhou, Anhui
Real photos of the production hall, machines, laboratory and warehouse behind your order.
Cable tie mounts — frequently asked questions
What are cable tie mounts used for?
Cable tie mounts fix a cable tie, and the bundle it holds, to a surface such as a panel, wall, cabinet or machine frame. You fix the mount first, then thread a standard cable tie through it.
How do self-adhesive cable tie mounts work?
Clean the surface with a dry cloth, peel the release liner and press the mount firmly in place. Then pass a cable tie through the slot — no drilling needed. Our HC series has a self-adhesive backing; the R and T styles also take a screw for a permanent fix.
Which cable tie fits which mount?
Use a tie narrower than the mount’s tie hole (T) listed in the specification tables — for example HC-19S has a 4.5 mm hole, so a 2.5 or 3.6 mm tie fits.
What temperature can the adhesive mounts handle?
The adhesive temperature range is available on request. Tell us your application and surface and our team will advise.
Do you make saddle mounts and wall-plug cable tie holders?
Yes. KHC saddle mounts are fixed with a screw, and TTH/TTD cable tie holders push into a Ø9 mm wall-plug hole for masonry and concrete walls.
What is the difference between wire tie mounts, zip tie mounts and cable tie bases?
They are the same product under different names: a base you fix to a surface so a cable tie can hold a bundle in place. We supply them as self-adhesive mounts, screw-fixed saddles, hexagon mounts and wall-plug holders.
What colours are available?
Natural and black, and custom colours are possible for bulk orders.
What is the minimum order for cable tie mounts?
Our minimum order is US$5,000 per order, and you can mix mounts, ties and other products to reach it. More answers are on our bulk cable ties FAQ.
Ready to order cable tie mounts?
Send your requirements and our export team will reply with pricing. Include these details:
Mount type & item no. Cable tie width Colour Quantity Surface / fixing Destination country Application