カスタム結束バンド — お好みの色、サイズ、ロゴ、パッケージで
カスタム結束バンドは、お客様が既に購入している製品にお好みの色、サイズ、印刷、パッケージを施せます。安徽省亳州市の自社工場で製造しており、ナイロンPA66、ポリプロピレン、ステンレススチールの標準品またはご指定の仕様で対応可能です。最小注文数は10,000本、サンプルは無料、24時間以内にご返信いたします。このページでは変更可能な項目、それぞれに必要な情報、見積もりに必要な内容を説明しています。.
ISO 9001CERoHSREACH最小注文数 10,000本24時間以内に返信
カスタム結束バンドで変更可能な項目
調整可能な項目は4つあり、それぞれ時間と金型費用が大きく異なります。必要な項目を把握することが、迅速で適切な見積もりを得る最短ルートです。.
パッケージ・プライベートラベル
プライベートラベル用の袋、箱、バーコードラベル、オリジナルデザインのパッケージ。お客様のパッケージに弊社名は入りません。.
どのオプションがご注文に適していますか？
ほとんどのご相談は1～2項目の変更で済みます。右側の欄の情報を最初のご連絡時にお知らせいただくと、質問のやり取りを省略でき、見積もりが早まります。.
| オプション | 変更内容 | ご提供いただく情報 | 一般的な用途 |
|---|---|---|---|
| 色 | バンドの色（全体） | Pantone番号または色合わせ可能なサンプル | ブランドカラー、色分けされた回路など |
| サイズ | 標準サイズ外の幅・長さ | 幅、長さ、保持荷重 | 在庫品で対応できない束ねる対象 |
| 印刷 | バンドへのロゴ、テキスト、コード印刷 | ベクター形式のデータと印刷位置の幅 | ブランド表示、資産管理タグ、ロット追跡用 |
| 梱包形態 | 袋、箱、ラベル、バーコード | デザインデータ、バーコード、梱包数量 | 小売棚、卸売在庫用 |
最小注文数、金型費用、納期はカスタム内容により異なります。ご注文前に必ず担当者にご確認ください。.
標準色と色合わせ可能な色
標準在庫色、UVグレード、カスタム生産可能な色範囲.
| グループ | カラー | 注意事項 |
|---|---|---|
| が位置をずらし、隣接部品や鋭利なエッジに擦れて、最終的に診断に時間とコストがかかる断続的な故障を引き起こします。大量生産において、数千台の車両でフィールド故障を引き起こす | Natural, White | Held in stock across the range |
| UV grade | ブラック | The outdoor and UV-stabilised option |
| On request | Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Grey | Produced to order on a custom run |
| Matched | Your Pantone | Send a reference or a physical sample; we confirm what is achievable in the material before you commit |
What is the minimum order for a custom run?
当社の標準最小注文数量は 10,000個. Where a run involves custom colour, printing or new tooling, the minimum depends on what is being changed — confirm it with our team before ordering. Pricing is quoted per thousand and improves with volume, because you are buying from the factory rather than through a trading company. For how larger volumes are priced, see 大量購入価格とMOQ.
Printed cable ties — logos, text and codes
A printed tie does two jobs at once: it fixes the bundle and it identifies it. Because the tie stays on the asset for the life of the installation, so does whatever is printed on it. Send vector artwork and the strap width, and we will confirm what stays legible at that size before anything is produced.
| What goes on the strap | Why buyers ask for it |
|---|---|
| Company name or logo | The tie stays on the asset for years — it keeps your name there too |
| Part, circuit or asset numbers | Identification without a separate label that can fall off |
| Batch or date codes | Traceability back to a production run during an audit |
| Warning or instruction text | Safety marking that cannot be separated from the fixing |
How a custom order runs, step by step
Seven steps from first enquiry to delivered goods, with two approval gates so nothing reaches volume without your sign-off.
01
Send your brief
Product type, size, colour, quantity, packaging and destination country.
02
We confirm what is possible
Material, tolerances, colour match and whether tooling is needed.
03
お見積り
Unit price, tooling or setup shown separately, and a lead time we can hold.
04
Artwork approval
For printed and private-label orders, you sign off the layout before production.
05
Pre-production sample
The real thing, from the real run, for your approval.
06
生産・品質管理
Moulding with logged parameters, then dimensional and tensile checks before packing.
07
出荷
Sea, air or DDP door-to-door with full export documentation.
Ready to start? Send your size list, artwork and destination country.
The factory behind your custom run
Two decades of factory-direct manufacturing, and custom work produced on the same lines and the same quality system as our standard range.
Personalized zip ties for brands, events and resale
Custom runs are not only for industry. Promotional and event work, retail own-brand lines and membership or access identification all come through the same process — the difference is usually artwork and packaging rather than the tie itself.
OEM・プライベートブランド様 流通業者・卸売業者様 Electrical contractors Promotional & event suppliers 小売・ホームセンター様 Utilities & asset owners Data centres
Private-label bags, cartons and barcode labels
The pack your customer picks up can carry your brand from the outer carton down to the barcode. Retail bags, bulk cartons, counted packs and your own label artwork are all standard options, and we print the barcode you supply rather than generating our own.
Send the artwork and the pack quantity with your enquiry. Packing format affects both shipping cost and shelf presentation, so it is worth settling early rather than at the end — changing it after the first run usually means new label tooling.
OEM production under your own brand
OEM is a core service, not an exception. We produce to your specification, pack under your label, and ship with documentation in your company’s name. Pre-production samples are approved by you before mass production begins.
If you are weighing OEM against buying a standard line and re-labelling it, the deciding factors are usually volume and how much of the product actually needs to change. Tell us both and we will say plainly which route is cheaper for you — see also our factory and OEM capability.
Where custom ties get ordered
The sectors where a standard tie off the shelf is not quite the product they need.
Electrical & Contracting
Circuit and panel identification printed onto the tie, in colours that match an existing site convention.
Automotive & Harness
Harness builds to a customer drawing, with part numbers carried on the tie for assembly-line traceability.
Data Centres & Telecom
Colour-coded runs and asset tagging across racks, where consistent identification is half the maintenance job.
Retail & Own-Brand
Hardware and DIY lines packed under a retailer’s own label, barcoded and counted to their shelf format.
Promotional & Events
Branded ties for festivals, access control and giveaways, where the print and the colour are the entire point.
Utilities & Asset Owners
Batch and date codes for traceability, on assets that get audited years after installation.
Personalised cable ties for events and promotional runs
Promotional work has different priorities from industrial supply: the print and the colour matter more than the tensile rating, and the deadline is usually fixed by an event date rather than a production schedule.
Tell us the date you need them in hand, not just the quantity. We would rather say early that a deadline is tight than discover it during production — and for a firm date, artwork approval is the step that most often slips.
認証済み、準拠済みで監査資料に対応
Independently issued documentation travels with every order, custom runs included, and we send it before you buy if your approval process needs it first.
Quality control on a custom batch
A custom run gets the same controls as standard production — incoming material verification, dimensional checks during moulding and loop tensile testing before packing — plus artwork and colour checked against your approved sample rather than against our own reference.
The step that matters most on a custom run is the first one off the line. We hold your approved sample at the machine and check the first articles against it — colour under consistent light, print position and legibility, and the dimensions — before the run is allowed to continue. Retained samples from each batch stay with us afterwards, so if a question comes up six months later we can go back to what actually shipped rather than to a specification sheet. Third-party inspection before despatch is welcome and several of our distributor customers book one as standard.
Need a size we do not already hold?
Beyond colour and printing we tool new sizes. Whether that is worth doing depends on your volume against the tooling cost, so send the dimensions, the load it has to hold and the annual quantity, and we will tell you honestly whether a custom mould pays for itself or whether an existing size will do the job.
Before quoting tooling we will usually check whether you need it at all. An existing width at a longer length, or a tier up in strength, solves a surprising number of requests at no tooling cost and with a much shorter lead time. A new mould makes sense when the dimension is genuinely unavailable and the annual volume carries the cost — and when it does, the tool is yours for repeat orders, so the second run is priced like any standard item. Send the drawing or the bundle it has to fit and we will tell you which of the two you are looking at.
Where custom orders are made
Real photographs from our Bozhou, Anhui site — the machines, the testing bench and the people behind your order.
よくある質問
カスタム結束バンドの最小注文数は何ですか？
当社の標準最小注文数量は 10,000個. です。カスタムカラー、印刷、新しい金型を含む場合は、変更内容により最小数量が異なりますので、ご注文前に必ず当社チームにご確認ください。サイズリストをお送りいただければ、正確なご案内をいたします。.
結束バンドにロゴを印刷できますか？
はい。ベクターアートワークをお送りいただき、どの幅の結束バンドに印刷するかをお知らせください。そのサイズで読みやすく収まるデザインをご提案いたします。細い結束バンドは表現できるディテールが限られるため、製造後ではなく事前にレイアウトを確認させていただきます。詳しくは当社のガイドをご参照ください。 カスタム印刷結束バンド.
どのような色がありますか？
ナチュラルとホワイトは標準色で、ブラックはUV安定化グレードです。ブラウン、レッド、オレンジ、イエロー、グリーン、ブルー、パープル、グレーは受注生産となります。ブランドカラーをご希望の場合は、Pantoneのリファレンスまたは実物サンプルをお送りください。ナイロン素材では色味によって特性が異なるため、ご注文前に実現可能な色を確認いたします。.
カスタム注文の納期はどのくらいですか？
リードタイムはカスタマイズ内容によって異なります。色の変更は新しい金型製作よりも早く、印刷の場合はデザイン承認の工程が追加されます。お見積もり時にご注文内容に基づき正確な納期を確認し、楽観的な納期よりも確実にお約束できる日程をご案内いたします。.
金型やセットアップの費用はかかりますか？
変更内容によります。色やパッケージの変更は通常金型が不要ですが、当社でまだ製造していないサイズの場合は必要です。セットアップおよび金型費用はご注文時に別途お見積もりいたしますので、単価に含まれることなくご確認いただけます。.
量産前にサンプルをいただけますか？
はい、無料です。OEM注文の場合は、量産開始前に承認用の試作品を製作いたしますので、お客様が実物を確認・承認されるまでは大量生産に進みません。.
自社ブランドでの梱包は可能ですか？
はい。プライベートラベルの袋、段ボール、バーコードラベル、およびお客様独自のデザインは標準サービスです。デザインと梱包数量をお問い合わせ時にお送りください。. OEMとプライベートラベルの違い ご検討中の方に、両者の違いを説明します。.